BayamOur projectsAccess Card
Adding card readers to doors
Card readers on stairwell, riser and lobby doors — so only the right people get through, and every tap is logged.
What's going on
Doors that should stay locked keep getting propped open or opened with a copied key. Management wants cards on the doors that matter — stairwells, risers, lobbies — without rebuilding the walls.
What we do
We mark each door, fit a wall box beside it and run the cabling back to a door controller. The Baycons reader goes on the box, the lock and exit button are wired in, and the controller is connected to the access system so cards can be added or blocked from one place.
Before we leave
We test every door with a working card, a blocked card and the exit button, then show management how to add and remove cards.
What's included
- Doors marked and wall boxes fitted
- Cabling back to the door controller
- Baycons reader, lock and exit button wired in
- Controller connected to the access system
- Every door tested with real cards
Got the same problem?
Send us a few photos of what you have now. We will tell you if it is a quick fix, a swap or a new install.