BayamOur projects
The jobs we get called for
Fibre to every floor, cameras in lifts, barriers that keep jamming, card readers that stopped reading, CCTV that went dark. Here is what each job looks like — what's usually wrong, what we do about it, and what you get at the end.
NetworkingRunning fibre through a building
Fibre from the riser to every floor and unit — trunking along the corridors, distribution boxes on each level and a neat rack at the end of it.
View project →
CCTVPutting CCTV in a lift
A camera in the lift, with video sent out over its own wireless link — no new cables down the shaft, and the lift is back in service in hours.
View project →
Barrier GateSwapping out a barrier gate
Out with the old motor, in with a Baycons unit — keeping the loops and cables that still work, and getting the lane moving again fast.
View project →
Access CardAdding card access to a lift
A card reader inside the lift and a controller on top of the car — so residents can only press the floors their card allows.
View project →
Access CardAdding card readers to doors
Card readers on stairwell, riser and lobby doors — so only the right people get through, and every tap is logged.
View project →
Barrier GateSetting up car park entry kiosks
Ticket and card kiosks at a car park entrance, wired to the barrier and tested with real cars and bikes.
View project →
Smart HomeFitting smart switches
Old wall switches swapped for smart ones — same wall box, but now the lights work from your phone and on a schedule.
View project →
HardwareBuilding our own access hardware
When off-the-shelf readers and controllers do not fit, we design the boards ourselves — then test them on site.
View project →
Access CardReplacing an RFID reader
A dead, weather-beaten or easy-to-copy card reader at a gate or door — swapped out and tested with the cards people already carry.
View project →
ANPRUpgrading a number plate reader
Out goes the old ANPR camera that misses faded, night-time and motorcycle plates; in goes a current AI reader on the same lane.
View project →
Barrier GateInstalling a new barrier gate
A brand-new lane from the ground up: Baycons motor, loops that pick up motorcycles, safety sensors, lights, and a link to ANPR or cards.
View project →- CCTV
Fixing CCTV that stopped working
We find out exactly why a camera or recorder went dark, fix that one thing, and make sure it is recording again before we leave.
View project → - CCTV
Replacing old CCTV cameras
Cameras that cannot see at night, or will not work with a decent recorder, come down — and a working set goes up in the same spots.
View project → 
CCTVInstalling CCTV from scratch
We plan where the cameras need to be first, then install cameras and a recorder — lifts, lobbies, car parks and fences all in one system.
View project →
Sounds like your site?
Email us a few photos of the lane, the lift or the cameras giving you trouble. We will tell you if it is a quick fix, a swap or a new install.