Bayam

Our projectsCCTV

Installing CCTV from scratch

We plan where the cameras need to be first, then install cameras and a recorder — lifts, lobbies, car parks and fences all in one system.

CCTV service →

What's going on

You are starting from zero, or close to it. The question is not which camera to buy — it is where things actually happen. Lobbies, lifts, car parks, loading bays and that dark corner by the fence each need a different kind of camera.

What we do

We walk the site and mark every camera spot before anything is ordered. Cables follow the building where possible. Across a driveway or compound we microtrench — a thin cut in the ground, cable in, surface sealed — instead of digging an open trench for a week. Lift cameras use the same wireless link as our lift CCTV job.

Before we leave

The recorder is sized for your number of cameras and how long you want to keep footage. Everyone who needs to watch gets their own login, and handover means showing you playback and export — not a list of passwords on a sticky note.

A new dome camera in the guardhouse, checked after install.
Bullet CCTV camera mounted on a pillar at a condominium drop-off area
Technicians pulling network cables out of the ELV room, with camera boxes on the floor
Monitor showing 32 lift lobby cameras recording at once
Team member setting up the CCTV system at the guardhouse desk

What's included

  • Camera planning and selection
  • Cabling, or microtrench for outdoor runs
  • Cameras, recorder, storage and remote viewing
  • Lift cameras on a wireless link if needed
  • Logins, storage and playback training

Got the same problem?

Send us a few photos of what you have now. We will tell you if it is a quick fix, a swap or a new install.

Email team@bayam.my

+603 8873 3800 · team@bayam.my