BayamOur projectsAccess Card
Adding card access to a lift
A card reader inside the lift and a controller on top of the car — so residents can only press the floors their card allows.
What's going on
Anyone who walks into the lift can go to any floor. Management wants residents to reach only their own floor and the shared facilities, and visitors to go only where they are invited — without replacing the lift.
What we do
We fit a Baycons card reader on the lift panel and a floor controller on top of the lift car, wired into the floor buttons. Our team works from the car top with the lift on inspection mode, running the cabling along the car and connecting the controller back to the access system.
Before we leave
Each card is set to the floors it may use, and we ride the lift to test a resident card, a visitor pass and a blocked card on every floor. Management gets a quick walkthrough on adding and removing cards.
What's included
- Baycons card reader on the lift panel
- Floor controller on top of the lift car
- Cabling along the car to the floor buttons
- Floors set per card or Sanapass pass
- Tested floor by floor with real cards
Got the same problem?
Send us a few photos of what you have now. We will tell you if it is a quick fix, a swap or a new install.